2026년 4월 13일, 월요일
식민지역사박물관
B&R
#하노버메세

KNX Incubator Programme and KNX Startups grows rapidly

New partnership with Silicon Catalyst increases the reach of KNX’s successful startup programme

KNX Incubator Programme and KNX Startups grows rapidly
The KNX IoT Startup Incubator has rapidly grown into a vital platform for supporting innovative companies in the home and building automation industry, with a global network of startups and manufacturers, and a recent strategic partnership with Silicon Catalyst enhancing its influence further.

The KNX IoT Startup Incubator has achieved remarkable growth and significance as a crucial platform supporting young, innovative, and ambitious companies in the home and building automation industry.

Since its launch in 2021, the program has garnered a global network of startups and leading manufacturers, fostering the development of groundbreaking IoT solutions. By offering valuable resources, expert guidance, and visibility at flagship events, the KNX Incubator has become a preferred destination for startups committed to KNX IoT-based solutions.

With a diverse array of startups on board, representing countries like India, France, Spain, Austria, Poland, Germany, and the UK, the Incubator continues to attract companies specializing in various aspects of IoT and automation technologies.

These startups are at the forefront of innovation, bringing novel approaches to IoT protocols, integrators and installers, human-centric lighting, firmware and IoT development, decentralized heat recovery units, 3D visualization, building-integrated photovoltaics, software, and energy.

The latest boost to the Incubator’s influence comes from its partnership with Silicon Catalyst, a leading incubator exclusively focused on semiconductor industry startups. With over 800 startups engaged worldwide, Silicon Catalyst brings vast experience and resources to the collaboration.

Through a new memorandum of understanding (MOU), the two incubators aim to create synergies and cross-promotional opportunities, enhancing their respective ecosystems.

For more information about the KNX IoT Startup Incubator, please visit https://www.knx.org/knx-en/for-manufacturers/startup/

As the partnership with Silicon Catalyst solidifies, the KNX IoT Startup Incubator takes yet another step towards becoming the premier incubator for startups in the home and building technology sector. The program’s success story continues to unfold, facilitating the growth and success of pioneering startups, ultimately contributing to the advancement of the entire IoT industry.

뉴스레터 구독하기

아이씨엔매거진은 AIoT, IIoT 및 피지컬 AI, 디지털트윈을 통한 제조업 디지털전환 애널리틱스를 제공합니다.
테크리포트: 자율제조, 전력전자, 모빌리티, 로보틱스, 스마트농업

AW2026 expo
ACHEMA 2027
우청 기자
우청 기자http://icnweb.co.kr
아이씨엔 매거진 테크니컬 에디터입니다. 산업용사물인터넷과 디지털전환을 위한 애널리틱스를 모아서 뉴스와 기술기사로 제공합니다.
fastech EtherCAT
as-interface

Related Articles

Stay Connected

440FansLike
407FollowersFollow
224FollowersFollow
120FollowersFollow
372FollowersFollow
152SubscribersSubscribe
spot_img
InterPACK
spot_img
SPS 2026
automotion
Power Electronics Mag

Latest Articles

Related Articles

PENGUIN Solutions
구글, 엣지 AI 혁신 이끌 ‘젬마 4’ 공개… 온디바이스 추론 성능 극대화

구글, 엣지 AI 혁신 이끌 ‘젬마 4’ 공개… 온디바이스 추론 성능...

0
구글이 인터넷 연결 없이도 스마트폰이나 소형 산업용 컴퓨터에서 빠르게 작동하는 인공지능 '젬마 4'를 공개했다. 이 모델은 크기가 작으면서도 성능은 대형 AI 못지않아 공장의 기계 상태를 살피거나 로봇을 조종하는 데 유용하다
WindEnergy
InterPACK

Related Articles

fastech EtherCAT
as-interface
마우저, 진동 데이터를 클라우드로 직결하는 암페놀 ‘VDS130’ 공급

마우저, 진동 데이터를 클라우드로 직결하는 암페놀 ‘VDS130’ 공급

0
마우저가 공급하는 암페놀 VDS130은 기존 아날로그 진동 센서 자산을 유지하면서도 현장 데이터를 MQTT 클라우드로 즉시 연결해 주어, 산업 현장의 디지털 전환 비용과 시간을 획기적으로 줄여준다
피닉스컨택트, 유지보수·보안성 강화한 실외용 스마트 이더넷 박스 출시

피닉스컨택트, 유지보수·보안성 강화한 실외용 스마트 이더넷 박스 출시

0
피닉스컨택트가 실외에서 사용하는 똑똑한 통신 상자인 스마트 이더넷 박스를 업그레이드했다. 가장 큰 장점은 고장이 났을 때 복잡한 광케이블을 다시 연결할 필요 없이 상자 본체만 갈아 끼울 수 있어 복구 시간이 매우 짧다는 것
[#HM24] HARTING, 미래 핵심인 전기에너지에 열정을 쏟다

[#HM24] HARTING, 미래 핵심인 전기에너지에 열정을 쏟다

0
HARTING은 2024 하노버 박람회에서 TECO 2030 연료 전지에 사용되는 연결 기술을 소개한다
[#HM24] 안전한 데이터 교환의 상생적 이점

[#HM24] 안전한 데이터 교환의 상생적 이점

0
Roseman Labs의 솔루션은 실제 데이터의 개인 정보와 상업적 민감성을 보존하면서 여러 데이터 세트를 암호화, 연결 및 분석할 수 있도록 한다
P+F, LiDAR와 MEMS 결합한 산업용 3D 센서 개발

P+F, LiDAR와 MEMS 결합한 산업용 3D 센서 개발

0
P+F와 프라운호퍼 연구소는 지난 4월말 독일에서 개최된 하노버산업박람회(Hannover Messe 2023)에서 LiDAR와 MEMS 기술을 결합해 개발한 R3000 3-D LiDAR/MEMS 센서에 대한 연구 사례를 발표했다.
- Our Youtube Channel -Engineers Youtube Channel

Latest Articles